|
HARDNOSE paints are tough,
glossy, two-component coatings
for use over primed or painted
surfaces. They are moisture
cured, so exposure to moisture
and humidity will actually
improve their performance and
strength.
When fully cured,
HARDNOSE Paints are rock-hard, chemical
resistant, non-porous, and
incredibly tough. Durable and
easily cleaned, they will not
crack, chip, peel, or fade with
age.
HARDNOSE Paints will
withstand even the most
intensive UV environments.
These beautiful, two-component
coatings are stronger than any
color paints you have ever
tried. The long-lasting
brilliant colors will look
terrific wherever you use them,
and will withstand incredible
abuse. You'll be amazed and
delighted at how well
HARDNOSE
paints hold up under conditions
that would quickly destroy
ordinary finishes.
HARDNOSE paints are also
excellent for industrial
applications. Use our safety
yellow or orange colors on
machinery guards or heavy
equipment, and then stand back
and marvel at how long they last
under abuse.
Put
HARDNOSE Paints on the
chassis of your car, truck, or
motorcycle, and quit worrying
about stone chips and gravel
roads. You'll be amazed at the
toughness
|
POR-15 Engine Enamel
POR-15 extra-pigment
Engine Enamels have been
formulated by RestoMotive
Laboratories to be the best and
most beautiful engine enamels
you can buy.
POR-15 ENGINE ENAMELS
are available in incredibly rich
colors that flow easily, cover
better than any other paint, and
last longer.
POR-15 enamels are
non-flammable and conform to
even the strictest California
environmental standards. We
invite you to compare them with
any other product and you’ll see
what we mean.
|
POR-15 FIRE SEAL 2000™
For
years we've been working on a
product to repair cracks, pits
or holes in exhaust manifolds,
tailpipes, mufflers, or other
components subjected to high
temperatures while in use.
Because replacement parts are
often difficult or impossible to
find, there is a real need for
this type of product in the
marketplace.
FIRE SEAL 2000™ is a
single-component (no mixing
required) ceramic and stainless
steel-filled putty that is
resistant to fuels, oils, and
corrosives. After it is fully
cured, it will withstand
temperatures up to 2000° F.
FIRE SEAL 2000™ may be
applied to rough-surfaced or
sandblasted steel, stainless
steel, or cast iron.
Instructions: Use a putty
knife, small trowel or spatula
to apply. Curing: Let
FIRE SEAL 2000™ dry for
16-24 hours. Begin final cure by
idling engine for 10-15 minutes
at a time. You may sand
FIRE SEAL 2000™ after it
is fully cured, using a file or
medium grit sandpaper. Do not
use any lubricants for
machining, but always use a dust
mask to avoid inhaling the
sanding dust.
|
